punching pile driver (hammer pile driver)

punching pile driver (hammer pile driver),
pile pit diameter from 600mm to 3500mm,
special for large pile
high efficiency

CK series Punching Pile Driver

Punching pile driver is a kind of important drill machine for cast-in-place pile construction. Its composed of main winch, assistant winch, machine frame, hammer, slurry pump and control tank.
Punching pile driver suitable for drilling cast-in-place pile construction, it with obvious strongpoint especially on cobblestone and boulder stratum. The operational principle is that lifting hammer then free fall reduplicate punching, crack the earth and rock of hole inside or pile into wall of hole, or make residue suspend in slurry, then hollow muck out by silo or pile wimble.
In despite of punching pile driver construction simply and low speed, but compare with other construction way the construction expend of general calculation is the lowest. Thats why so many construction company choose punching pile driver. At the same time, around hole wall come into being one layer close-grained earth stratum for leveling off hole wall and improving pile load capacity.

 

Technical Parameters of CK Series Punching Pile Driver

Parameter/Model

CK900

CK1500

CK2000

CK2200

Diameter of Punching (mm) 

600-900

900-1500

1500-2000

2000-2200

Depth of Punching(m)

80

80

80

80

Model of Main Winch

(Ton)

JKL3

JKL5

JKL8

JKL10

Subsidiary Winch(Ton)

JK1.5

1.5

2

2

S.W.L

Rated pulling(KN)

30

50

80

100

Diameter of Main winch Wire Rope (mm)

17

22

28

30

Power of Main winch Motor(KW)

22

37

55

75

Punching Number (n/min)

5-6 n/min

Diameter of Hammer

(mm)

φ600∼φ2200

Weight of Punching Hammer

2ton

4ton

6ton

8ton

Weight of Complete Machine

5500kg

6500kg

9500kg

9800kg

Overall Dimension(mm)

6000×2200×6300

7000×2000×7000

7200×2000×7200

7200×2000×7200